News

The Replacement Methods For Forklift Friction Plate Assembly

Friends who are familiar with forklifts may know that the assembly is a series of parts or products that form a whole to achieve a specific function, and the general name of this system is the assembly. Today, we will introduce how to replace the friction plate assembly.

1. Firstly, step on the clutch pedal, so that make the friction sheet off.
2. Rotate the sliding screw at the upper end of the gearbox counterclockwise to make the drive shaft retract into the gearbox.
3. Remove the pressure plate shell bolt, so that make it off the flywheel, take out the old friction plate assembly.
4. Install the new friction disc assembly, should pay attention to the friction disc hub spline sleeve extended out of the longer end towards the transmission side.
5. Turn the sliding screw clockwise and gradually pull out the active bearing to insert it into the spline hole of the friction disc.
6. When judging that the drive shaft has indeed entered the middle bearing of the flywheel, then lock the sliding screw and tighten the torque.
7. Install the pressure disc shell on the flywheel.
8. Also need to adjust the clutch pedal.