Industry-news

Matters needing attention for starting up LPG forklift

Inspect according to the inspection items of ordinary gasoline or diesel forklifts;
Check whether the cylinder is secure and whether the LPG system is abnormal:
Turn on the manual switch on the cylinder and check whether the system is leaking;
Start the engine and check if it runs normally.
Engine starting methods:
1) Confirm that the manual valve on the cylinder is fully open:
2) The starting method is exactly the same as that of a general gasoline engine. The only difference is that you do not need to step on the accelerator;
3) For dual-fuel systems, the switch valve switch must be turned to the "LPG" position:

4) After starting, especially in cold weather areas, it is best to warm the car with light (or hot water) for two or three minutes to allow the engine's cooling water system to heat up before driving. This ensures that the warm water flows to the carburetor and accelerates its vaporization. And it will not cause frost to cause air supply failure or flameout.